• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 174 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

WEBENCH-POWER-DESIGNER: Battery Power Section

Abhishek Velagada
Prodigy 30 points
Part Number: WEBENCH-POWER-DESIGNER

Tool/software:

Hi TI Team,

I am Abhishek, working as Hardware Design Engineer in Schneider electric. 

Need your help in providing a solution to design a circuit to immediately power up the device upon connecting the charger for a deep-discharge battery?

Regards

Abhishek

  • 0
    TI__Guru**** 166626 points

    Hi Abhishek,

    All of TI's charger's with power path feature (SYS and BAT separated by FET) have this feature.  What is your input voltage and current, battery voltage voltage and max charge current and minimum system voltage at power up?  Do you need standalone (resistor settable) or do you have I2C host?  

    Regards,

    Jeff