LM66100: Pspice model

Thank you, Timothy! Greatly appreciated!

Hi Timothy, I run into minor issue when I imported file into Keysight ADS. Please see warning messages:

WARNING: Appended "_n" to node y due to a conflict with a reserved word.
WARNING: Appended "_n" to node y due to a conflict with a reserved word.
WARNING: Appended "_n" to node y due to a conflict with a reserved word.
WARNING: Appended "_n" to node y due to a conflict with a reserved word.
WARNING: Appended "_n" to node y due to a conflict with a reserved word.
WARNING: Appended "_n" to node y due to a conflict with a reserved word.
WARNING: Appended "_n" to node y due to a conflict with a reserved word.
WARNING: Appended "_n" to node y due to a conflict with a reserved word.
WARNING: Appended "_n" to node y due to a conflict with a reserved word.
WARNING: Referenced circuit "zx" not found.
Subcircuits found in Spice Netlist: 9
Subcircuits written to ADS Netlist: 9

The largest issue appears to be missing Referenced circuit "zx"

This model was made for Orcad PSPICE so I cannot comment on the functionality in Keysight. That being said, if there is a missing subcircuit it appears there might be an issue with the model and I will file an issue with the tracker.

If needed- I can send a free EVM sample (which would be the best way to evaluate the device). Let me know if you are interested. 

Thank you, Timothy. I am able to import and run other PSPICE netlist models I downloaded from TI website in Keysight ADS. Free EVM sample would be of interest.

Got it- do you mind if I contact you via the email associated with the MyTI account?

Yes, please go ahead.