Other Parts Discussed in Thread: USB2GPIO-LOADER-SW, , BQ78PL114
Tool/software:
Hi Experts,
Can you help this concern from customer about USB-to-GPIO?
I have a usb to gpio, but crashed during installation. Then the TI team sent me the aploader file. But even though I uploaded, the USB to GPIO firmware loader cannot find the device.
When the device first arrived, it had this firmware: usb_dpw_v1.0.10.
Ordered from mouser:
https://www.mouser.com.tr/ProductDetail/Texas-Instruments/USB-TO-GPIO?qs=MULgx31AC9USCtCUpMxK%2FA%3D%3D
*****
Found this post - e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/704610/usb2gpio-loader-sw-cannot-find-firmware
But no use. here is the snapshot shared:
I'm seeing solution using USB2GPIO-LOADER-SW but this is no more available to access anywhere.
Couldn't create a post for USB-to-GPIO, reference USB-to-GPIO2 instead.
For your further assistance. Thank you.
Regards,
Archie A.