Tool/software:
Hi,
Our customer is planning to connect two resistors in series to V(BUS) to configure 900k ohms. Is there any problem with that?
Best regards,
Hiroshi
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software:
Hi,
Our customer is planning to connect two resistors in series to V(BUS) to configure 900k ohms. Is there any problem with that?
Best regards,
Hiroshi
Hi Hiroshi:
As long as total resistors close to 900k from VBUS and VBUS_DET pin., it should be ok.
Regards
Brian