This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS92629-Q1: FAULT signal when DIAGEN=Low

Part Number: TPS92629-Q1

Tool/software:

Hello team,

We just would like to detect "short to GND" and "overtemperature" fault only, so will make DIAGEN = Low.

In this case, when "open circuit" / "Short to Battery" happens, this device does not report the fault through Fault pin, and device does not react to this fault, right?

Regards,

Hirata