TPS61043: MIX DATE CODES (TAPING)

EUGENE AW

Part Number: TPS61043

Tool/software:

Greetings. Would like to know in the event that i have a mix date code in a reel. Will the older date code will be located at the trailer of the carrier OR header of the carrier of User Direction?

Vice versa for newer date codes. Kindly advice and would be better if any link/document by TI mentioned about this. Thank you

5 months ago

0 Patrick Yao 5 months ago

TI__Mastermind 28960 points

Hi Eugene,

Let me check internally and give you feedback later. BTW, is the order cause any concern for you?

Patrick

0 EUGENE AW 5 months ago in reply to Patrick Yao

Prodigy 70 points

Hi Patrick. Order no issue. We would like to know how TI products are taped and if there's any document to support with the taping arrangement.

0 Patrick Yao 5 months ago in reply to EUGENE AW

TI__Mastermind 28960 points

Hi Eugene,

Unfortunately I didn't find such documents. And usually we will not include different lots chip in one reel.

Patrick

0 EUGENE AW 5 months ago in reply to Patrick Yao

Prodigy 70 points

Hi Patrick, as mentioned for mixed date codes where TI label indicated so, not lots. Will TI have them, taped in the reel in which format ? Older date codes first or newer date codes?

In user direction

Header (Beginning or the reel)

Trailer (End of the reel)