UCC28951-Q1: UCC28951: Unencrypted PSpice Model for UCC28951 or UCC28950

Shashank Varshney

Prodigy 90 points

Part Number: UCC28951-Q1
Other Parts Discussed in Thread: UCC28951, UCC28950

Tool/software:

How can I get the unencrypted model of UCC28951QPWRQ1. Please share the link to access the model.

over 1 year ago

0 Ulrich Goerke over 1 year ago

TI__Mastermind 40120 points

Hello Shashank,

Please see this previous E2E post on this topic:
https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/918886/ucc28951-unencrypted-pspice-model-for-ucc28951-or-ucc28950

Regards,
Ulrich

0 Shashank Varshney over 1 year ago in reply to Ulrich Goerke

Prodigy 90 points

The attached unencrypted model is not working. I have already seen that. Can you please check it.

0 Shashank Varshney over 1 year ago in reply to Shashank Varshney

Prodigy 90 points

It is not the exact unencrypted model of UCC28951. It is not having 24 pins. Can you please check and provide the correct model of UCC28951QPWRQ1.

0 Ulrich Goerke over 1 year ago in reply to Shashank Varshney

TI__Mastermind 40120 points

Hello Shashank,

I'm sorry but that is the only model that I can find available for the UCC28951. The expert for this device is currently out of office.
I will refer this issue to him after he returns next week.

Regards,
Ulrich

0 Shashank Varshney over 1 year ago in reply to Ulrich Goerke

Prodigy 90 points

Hi Ulrich.... I will be waiting for your reply. Thanks.

0 Mike O' over 1 year ago in reply to Shashank Varshney

TI__Guru* 85616 points

Hello,

I am taking this over for Uli and will look into it for you.

Regards,

0 Mike O' over 1 year ago in reply to Mike O'

TI__Guru* 85616 points

Hello,

I have attached the unencrypted PSpice model for the UCC28950 and UCC28951 devices. I checked the model and it seems to be functioning correctly.

2620.UCC28950_PSPICE_TRANS.zip

Regards,

0 Shashank Varshney over 1 year ago in reply to Mike O'

Prodigy 90 points

But this model is also not having all the 24 pins. THis model will work only for specific application. I want the full unencrypted 24 pin UCC28951 IC. Please provide if it is feasible.

0 Mike O' over 1 year ago in reply to Shashank Varshney

TI__Guru* 85616 points

Hello,

Sorry that I missed that the model does not have all 24 pins. This model however, is the only encrypted model that is available for this device.

There is an encrypted 24 pin model that has the full 24 pins that you can find at the following link. You can use this model with TI PSpice to simulate your design.

https://www.ti.com/lit/zip/slum169

Regards,

Power management

Power management forum

UCC28951-Q1: UCC28951: Unencrypted PSpice Model for UCC28951 or UCC28950

How can I get the unencrypted model of UCC28951QPWRQ1. Please share the link to access the model.