• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 208 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS25751: Resetting via GPIO event

Luke Sakamoto
Intellectual 2075 points
Part Number: TPS25751

Tool/software:

Hi team,

I would like to reset the PD controller via GPIO. (no command such as "hard reset")

The goal here is to re-load the updated EEPROM.

Would this event reset the PD?

"33 Fault_Input_Event"

Thanks,

Luke

  • 0
    TI__Genius 13880 points

    Hi Luke,

    This event would not reset or restart the PD controller. A GPIO event like you you describe does not exist for this part.

    However, you can restart the PD controller by bringing VIN_3V3 low and bringing it high again.

    Kind regards,

    Conner Gillette