• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 157 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM5001: webench question

Lillian Liu(SH)
Expert 4620 points
Part Number: LM5001
Other Parts Discussed in Thread: LM5158

Tool/software:

Hi team,

Could you help check why I can't design as below setting?

Thanks

Lillian 

  • 0
    TI__Mastermind 29710 points

    Hi Lilian,

    Thanks for using the e2e forum.
    I am sorry that you got an error using the webench tool.

    Is there are preferred topology you want to implement?
    LM5001 is a boost converter, but can also be implemented as SEPIC or Flyback.
    As your Vout spec is always lower than Vin, you can also use a Buck converter.

    If isolation is required, you can use a flyback design using LM5158.

    Best regards,
    Niklas