• State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 64 subscribers
  • Views 114 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM3405: Question about LM3405

Jimmy Huang
Genius 3005 points
Part Number: LM3405

Tool/software:

Hello：

If PWM adjustment is not required for LM3405, first connect the EN pin to GND and turn off this function. If I only need to turn it on and off, then I can connect the switch button to the power input terminal to achieve it, right?

  • 0
    TI__Intellectual 1840 points

    Hi Jimmy, 

    I am here to help you with your question.

    Based on your words, you mean you do not need PWM dimming function, right? If so, you only need to tie the EN/DIM pin to VIN. 

    May I ask what you mean by 'switch button'? 

    Thank you! 

  • 0 in reply to John Shen
    Genius 3005 points

    Hi Qingwei：

    I still need the LED driven switch function, but does not use PWM to adjust, only on and off. Therefore, they want to add a switch button at the power supply position to achieve on and off in conjunction with the conduction of the transistor. Please guide, thank you!!!

  • 0 in reply to Jimmy Huang
    TI__Intellectual 1840 points

    Hi Jimmy, 

    Got your idea. 

    In this case, you only need to always tie the EN/DIM pin with VIN. Then you could use the button on power rail you mentioned to control the device on/off by connecting/disconnecting the power supply. 

    Thank you! 

    Best,

    Qingwei.