• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 191 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

BQ25713: BQ25713

BQ25713: Can BQ25713 set up the cut off charge current?

Manu Chang
Intellectual 1990 points
Part Number: BQ25713

Tool/software:

Hi Team,

I would like to ask that if BQ25713 can set up the cutoff charge current by writing registers? I didn't able to find any related registers.

If it cannot be setup, what is the common method for users to terminate/stop the charging process when using BQ25713?

BR.

Manu

  • 0
    TI__Mastermind 32286 points

      Hello Manu,

    The BQ25713 does not have charge termination. The host or gauge in the system is intended to measure the current and handle termination. When battery is full or battery is not in good condition to charge, host terminates charge by setting REG0x00[0] to 1, or setting ChargeCurrent() to zero.

    Best Regards,

    Christian.