Tool/software:
Hello,
I'd like to add STM32 MCU to BQ40Z80 to output data via CAN. What is the best way to power the device when using BQ40Z80. Any references available for the same?
Thank you!
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software:
Hello,
I'd like to add STM32 MCU to BQ40Z80 to output data via CAN. What is the best way to power the device when using BQ40Z80. Any references available for the same?
Thank you!
Hi Saero,
I believe the bq40z80 EVM implements a TI MCU for reference, the bq40z80EVM User's Guide has the schematic below:
Regards,
Anthony
Hey,
I do have few of the EVMs. I wanted to understand how we can utilise MCU and power it when pack is removable. I would like to disable MCU once bq40z80 is at sleep. Enable MCU with a push button latch power until it's disabled.
Any suggestions?