LM5164: 6.3v to -16v inverter.

Gil Schloss

Part Number: LM5164

Tool/software:

For a 6.3v to (-16) v inverter, the Webench advised the attached schematic.

But this design cant be simulated.

Is there a spice model for LM5164 device thus the design can be proof.

Is there another way to try promise the design before assembling ?

0 David Baba over 1 year ago

Hello Gil,

The design cannot be simulated as the model typically has internal 0V nodes tied to Gnd.

You can check the design against your requirements by following the procedure outlined here in.

Hope this helps.

David.

Power management forum