Tool/software:
Dear TI team,
I am working on DFMEA of IC TPS6522053RHBR. I would like to know what will happen to out of Buck 1 if Buck 2 or any other LDO output is shorted?
Regards,
Shritesh
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software:
Dear TI team,
I am working on DFMEA of IC TPS6522053RHBR. I would like to know what will happen to out of Buck 1 if Buck 2 or any other LDO output is shorted?
Regards,
Shritesh
Hi,
Thank You for using E2E. If the PMIC detects a short to ground fault (SCG) in any of the rails (DCDCs or LDOs), it disables the affected rail immediately and executes a power-down sequence to turn-OFF the remaining rails.
Thanks,
Brenda