• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 163 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ25622EVM: Set parameters

Paul Chang
Prodigy 40 points
Part Number: BQ25622EVM

Tool/software:

Dear TI,

Why are the hexadecimal voltage displays of the two different? ↓(From datasheet to Battery Management Studio)

  • 0
    TI__Mastermind 31720 points

    Hi Paul, 

    Thank you for reaching out via E2E. Please see my comments below. 

    The hexadecimal value shown in REG0x04 field descriptions table for VREG setting is in respect to bits 11:3, whereas the hexadecimal code shown in the Battery Management Studio GUI is in respect to the full 16 bit register. 

    Hex value 1A4 = 110100100b, which is the same binary value shown in the highlighted portion of the provided image of the GUI for bits 11:3. 

    Best Regards,

    Garrett