TPS1HC30-Q1: TPS1HC30-Q1 Faulr Table

Hello Viola, 

VOUT(2) is correct in this case. When testing the device, the user can probe VOUT(2) to verify what is present in the Fault Table. Point 1 is internal and unable to be referenced to the user in testing. 

BR, 

Alan

Hi Alan,

but why Vout=Iload*Rdson, not Iload*Rload at normal condition?

and shy Vout=VBB-ILIM*Rload at overcurrent condition?

this two seems VDS, right?

Hi Viola, 

Following up about this. Will get back to you EOD 10/1

Best, 

Alan

Sorry for the confusion!

The normal operating condition should be labeled as VBB - ILOAD * RON

BR, 

Alan

how about overcurrent?
it also seems incorrect.

please help to clarify.

and will TI update the correct datasheet?

thank you.

The overcurrent condition is ILIM X RLOAD this is a mistake in the datasheet. Soon we will have a full team and work with the systems group to mitigate these changes. 

I'm am sorry for the delay and misunderstanding.

Best Regards, 

Alan

hi alan,

thanks.

if TI have update the latest datasheet. please contact to me.

thank you.