Tool/software:
When I apply 3.3 V to Enable pin I see a delay 5.78 ms on the output. Is this normal?
*.CIR file:
RVD_CAR (TINA Netlist Editor format) ************************************** ** This file was created by TINA ** ** www.tina.com ** ** (c) DesignSoft, Inc. ** ** www.designsoftware.com ** ************************************** .LIB "<TINADIR>\EXAMPLES\SPICE\TSPICE.LIB" .LIB "<TINADIR>\SPICELIB\Operational Amplifiers.LIB" .TEMP 27 .AC DEC 20 10 1MEG .TRAN 80U 40M UIC .DC LIN VEN1 0 1 10M .PROBE V([EN]) V([Vout]) Vin 4 0 12 VEN1 EN 0 DC 0 AC 1 0 + PWL TIME_SCALE_FACTOR=20M VALUE_SCALE_FACTOR=3.3 + REPEAT FOREVER + (0, 0) (500N 1) (499.9995M 1) (500.0005M -1) (999.9995M -1) (1,0) ENDREPEAT R2 Vout 0 1K R1 3 Vout 15K C1 4 0 1U R3 5 3 511 C2 6 0 22N XU1 6 EN 0 5 4 3 TPS22810_TRANS * SUBCKT: TPS22810_TRANS encrypted macro, content not displayed .END
