Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 64 subscribers
  • Views 45 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TLC69602-Q1: TLC69602-Q1

jay chi
Prodigy 20 points
Part Number: TLC69602-Q1

Tool/software:

Hi Team，

     We want to apply the UART/INT feature of  TLC69602-Q1,but which had some problem.

    workflow：

    step 1：Setting all register (spec：FC4 = 0X003E, FC6 = 0X3C33).

    step2 ：Setting Brightness levels.

     step3 ：Setting different brightness levels.

     

     After setting up the all register，I found that the INT pin changed from H to L. LEDs are all good. 

      I'm not sure if the process is correct, can you provide me with a copy of the operating procedure？

     Hoping for good news. 

     Thanks！