Tool/software:
Hi we're using this part, but controlling an external switch through SINK_EN_L, so I don't think we'll use the N-Driver. How to connect GATE_VSYS and GATE_VBUS pins when these are unused?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software:
Hi we're using this part, but controlling an external switch through SINK_EN_L, so I don't think we'll use the N-Driver. How to connect GATE_VSYS and GATE_VBUS pins when these are unused?
For the GATE_VSYS pin and the GATE_VBUS pin, leave not-connected(NC)/floating if unused.
Regards,
Conner