This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello,
BQ40z50 should have the same default 0x16 address.
Regards,
Anthony
hi Anthony,
I found that the information about BQ40Z50 is not written.
https://www.ti.com/lit/ug/sluua43a/sluua43a.pdf?ts=1730238266118&ref_url=https%253A%252F%252Fwww.ti.com%252Fproduct%252FBQ40Z50
BQ40Z50-R2 is have found,
What is the difference between BQ40Z50 and BQ40Z50-R2?
Hello,
Apologies, I did not recognize this is not listed in the bq40z50 TRM. Below confirms what was said previously:
In this situation, the difference between bq40z50 and bq40z50-R2 is that R2 allows for the user to change the device address if necessary.
Regards,
Anthony