TPS61175-Q1: TPS61175-Q1 Confirm

Hi Yong,

There is a similar thread here.

(+) TPS61175-Q1: schematic review - Power management - INTERNAL forum - Power management - INTERNAL - TI E2E support forums

And I will answer the question at that thread.

Best Regards,

Fergus

Hi Fergus，

I cannot reach the link you attached.

thank you.

Hi Fergus，

The output caps please refer to 

Thank you.

BR Vincent

Hi Fergus

Thank you for your review.

I will used the current design to do test on the bench,  if the output caps not suitable I will change one from 10uF to 6.8uF，I found there is not the 8uf in Murata.

Thank you.

BR Vincent

Hi Vincent,

I'm not mentioning the value of the capacitor but the effective value.

Usually increasing the capacitor not decreasing is benefited to gain a more stable loop.

Best Regards,

Fergus