TPS63060: tps63060

syam kandelli

Part Number: TPS63060

Tool/software:

Hi ,
iam using tps63060 buck-boost

i didn't any output voltage please review and give any Suggestion .also am using a 1uH inductor, the label is wrong in the schematic.

thanks
syam

0 Tao Zhang 9 months ago

Hi syam,

Your schematic should be ok, do you have some waveforms can shared here?

Regards

Tao

0 syam kandelli 9 months ago in reply to Tao Zhang

Hi Tao,
Can you please my schematic and layout and, let me know if any changes

0 Tao Zhang 9 months ago in reply to syam kandelli

Hi Syam,

Comments for your schematic as below

If PG is not used for next stage control, you can just keep is floating, which means you can delete R6 and R5.
C7 is mounted or not in your actual board? 1uF is too large, recommend just keep it reserved.
You can just delete R1 and R2, connect Pin EN to Vin directly.

For layout, could you just take the layout example in datasheet as ref? Or i can send you our PCB design files if you want.

Regards

Tao