Tool/software:
Hi All,
I have some questions about the TPS54628.
(1) Is there an FMEA?
(2) Are there EMC test results?
Best Regards,
Ishiwata
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software:
Hi All,
I have some questions about the TPS54628.
(1) Is there an FMEA?
(2) Are there EMC test results?
Best Regards,
Ishiwata
Hello, Due to US holiday we will respond next week
Hi Amod-san,
Thank you for your reply.
I'll ask again specifically about FMEA or EMC.
(1) Can you provide pin open, pin to VCC short circuit, pin to GND short circuit failure mode analysis information ?
(2) Can you provide noise immunity estimation data or information for noise sensitive or Hi-Z node e.g. VFB, VREG5, SS
Do you have these documents?
Best Regards,
Ishiwata
Hi Ishiwata-san,
I can check FMEA or point 1 above with design team. For point 2, we do not have any such data. Please give me till end of next week for the information on point 1. If you want, we can also communicate via email and close this thread in the meanwhile.
Thanks,
Amod
Hi Amod-san,
Thank you for your reply.
I understand that you do not have the documents for (2).
Regarding (1), I would like to send you a private message with my email address along with the customer information.
Can I send you a private message after sending you a friend request?
Best Regards,
Ishiwata
Hi Ishiwata-san,
Amod is out, he will respond to this, this week.
Thanks,
Calan