UCC28740: Can't open SIMPLIS model

Beida Song

Intellectual 780 points

Part Number: UCC28740

Tool/software:

Hi Expert,

Customer download the UCC28740 SIMPLIS model, but there is an error when they try to open it. Can you help solve it?

7 months ago

0 JCHK 7 months ago

TI__Guru 50090 points

Hi Beida,

It looks like they do not have Simplis installed on their system. If they don't have Simpis, the excel design calculator tool is the next best thing.

Regards,

0 Beida Song 7 months ago in reply to JCHK

TI__Intellectual 780 points

Hi Jchk,

I don't open it with SIMetrix. Can you help check it?

0 JCHK 7 months ago in reply to Beida Song

TI__Guru 50090 points

HI Beida,

I Don't have Simplis on my system. I can check with others on the team to see if there is a version compatibility issue. If you have Simplis properly installed, the model should load.

0 JCHK 7 months ago in reply to JCHK

TI__Guru 50090 points

HI Beida,

I just confirmed the model loads in Simplis. If you are using a trial version of Simplis it does limit the number of components in a schematic. That could be the issue you are seeing.

0 Beida Song 7 months ago in reply to JCHK

TI__Intellectual 780 points

Hi Jchk,

Thanks, customer does use the trial version of Simplis.

0 JCHK 7 months ago in reply to Beida Song

TI__Guru 50090 points

Hi Beida,

That makes sense, Unfortunately the trial version of Simplis is very limited.

Power management

Power management forum

UCC28740: Can't open SIMPLIS model