• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 62 subscribers
  • Views 139 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS65218: TPS65218 PMIC

Rajaram Amarnath
Prodigy 30 points
Part Number: TPS65218


Tool/software:

Hi,

We are using TPS65218 our application. 

When we try to program the IC through IPGUI tool provided by TI, but we are facing issues. The IC is continuously rebooting.

After writing the ENABLE1 register, we are getting 00 written on the registers if we read the same. We suspect the board entered into recovery mode.

We are not facing any issues with evaluation module. Also, our circuit is very similar to eval module. What could be the reason for continuous reboot. 

Thank you.

  • 0
    TI__Genius 11917 points

    Hi Rajaram, 

    Can you please confirm if you are using the TPS65218 or TPS65218D0 ? 

    And are you able to share a schematic of your circuit so I may take a closer look at what could be potentially causing the issue?
    You may message me privately if privacy is a concern. 

    Best Regards, 
    Sarah