• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 82 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ULN2003A: Vsup current for above mentioned part number

venkatesh M
Prodigy 30 points
Part Number: ULN2003A

Tool/software:

kindly let me know the current consumption for COM pin. (FYI PART NO:ULN2003ADR) .

  • 0
    TI__Mastermind 27900 points

    Hi Venkatesh,

    When a given channel is steady-state OFF (OUTx = VSUP), the current from COM to that OUTx will be 0. When a given channel is ON (OUTx = LOW), the current from COM to OUTx will be as defined below, where the bottom specification is at Tamb = 25C.

    Thanks,

    Patrick