• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 105 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

BQ25756: MPPT Solar Application + 240W USB-C.

BQ25756: MPPT tracker with another kind of power supply

Nerea U
Prodigy 20 points
Part Number: BQ25756

Tool/software:

Hello,

I would like to know what would happen if I activate the MPPT and use a "normal" and continuous power supply. I´m going to see any output here or would it just not work?

Thank you!

  • 0
    TI__Mastermind 30675 points

    Hello Nerea,

    In MPPT mode with a normal power supply, the BQ25756 will first sweep across VAC_DPM values to find the maximum power point of the input supply. After that, the BQ25756 will output a normal charge current.

    Let me know if you have any questions about this.

    By the way, the BQ25756 FAQ page has a few notes on this that may be helpful.

    Best Regards,
    Ethan Galloway