Other Parts Discussed in Thread: BQ25756
Tool/software:
Hi,
Actually, my question is not as such related to BQ25798, just mentioned it as an example because the system insisted some product to be named..
My actual question is, does any of TI battery charger ICs or solutions support MPPT operation which would be suitable to be used with a micro scale wind generator? Due to the nature of wind power, the generator output power may vary quite a lot within short timescale. Hence, updating the MPPT operation point at, say 15min interval, is probably way too slow. Operation should rather be more or less continuous based on P&O (perturb and observe) algorithm or alike.
Regards,
Jyrki