Tool/software:
Please help check the schematic, thank you!
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
Please keep the thermal pad floating otherwise reverse polarity protection will be lost.
Since, you are using 40V rated FETs. We would recommend using 2 unidirectional TVS in back-to-back configuration as shown below.
For more understanding on TVS selection while using 40V rated FETs, please refer to section ‘10.2 TVS Selection for 12-V Battery Systems’ of LM74810-Q1 Datasheet
Rest, the schematic looks fine.
Regards,
Shiven Dhir