• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 119 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TL783: Parallel configuration

Nicola Fiorucci
Prodigy 190 points
Part Number: TL783

Tool/software:

Hi, we are using the TL783 LDO in our application and we are evaluating the possibility to parallel 2x TL783 to share the load current in order to decrease the individual power dissipation?

Is there any application note on how to connect two TL783 in parallel configuration?

Thanks very much

  • 0
    TI__Mastermind 37065 points

    Hi Nicola,

    You can parallel the TL783 but this linear regulator is not recommended for new designs.  Can we get the requirements from the customer (Vin, Vout and Iout)?  We might be able to suggest an alternative component.

    Thanks,

    Stephen