This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS1663: GND on NC pins

Part Number: TPS1663

Tool/software:

Hi, 

The datasheet for TPS16630RGER has Figure 10-11. PCB Layout Example With QFN Package With a 2-Layer PCB where the NC pins are connected to GND to flood the neighboring areas. 

The pin table does not say anything about connecting the NC pins to GND. Should I be connecting the NC pins to GND? 

Thanks,