TPS3850: CRST limitation when latching WDO

Tool/software:

Hi team,

My customer would like to implement latching output for WDO.

I found below e2e thread which suggests to add buffer.

https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1298948/tps3850-q1-latching-wdo-watchdog-output 

But this method recommends to use 150pF to 5nF capacitor for CRST, but the customer would like to use have much longer reset time.

Is there any concern to use 100nF or NC for CRST with latch configuration using buffer?

Best regards,

Shota Mago