• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 148 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

EV2400: EV2400 EVM Interface Board

Sowmiya S
Prodigy 10 points
Part Number: EV2400
Other Parts Discussed in Thread: BQSTUDIO

Tool/software:

Hi,

We are interested in the EV2400 USB-Based PC Interface Module for Battery Fuel (Gas) Gauge Evaluation. Could you please provide us with detailed information regarding the configuration of the ports? Specifically, we would like to know if it is possible to use all four ports for I2C communication.

Additionally, we would like to inquire about the data logging and recording capabilities of this module.

Thanks

  • 0
    TI__Mastermind 28470 points

    Hi Sowmiya,

    The EV2400 has a singular SMBus port, I2C port, and HDQ port. It is not possible to configure these ports for other communication types, or use multiple at once on the same board. You can use multiple instances of bqStudio, however one EV2400 is needed per instance.

    Data logging is available on this device. Are there certain specifics you are looking for?

    Regards,

    Anthony