Tool/software:
I have sent the data files in zip but I get there is email which tells me error in gauge parameter calculation. Can you help me what can be the reason behind it. I have followed the documents correctly. I am attaching my zip here please help me out.
Thanks!GG_GOLDEN_IMAGE.zip
Hello Yojan,
It appears that some difference is that within your test procedure you didn't allow for a completer taper current to go to C/20 for a sustained period of time but either than that you did allow for 5 plus hours of rest in the end of the test, the long the rest period typically the better. However, I believe the biggest reason for getting an error from the tool is mainly due to missing a roomtemp.csv, and not using the proper file naming (config.txt, roomtemp.txt, lowtemp.txt, gg.csv ).
Golden GG Maker and Resistance Temperature
Compensation Optimizer:
https://www.ti.com/lit/ug/sluubd0/sluubd0.pdf?ts=1741300603392&ref_url=https%253A%252F%252Fwww.ti.com%252Ftool%252FGAUGEPARCAL
Thank you,
Alan
