LM63610-Q1: Simetrix spice model of LM63610DQDRRRQ1

Sri Viswa Sathiamoorthy

Part Number: LM63610-Q1

Tool/software:

Hi,

We would like to perform simulations for LM63610DQDRRRQ1. Kindly share the unencrypted/simetrix spice model of LM63610DQDRRRQ1.

Thanks,

Sri Viswa

6 months ago

0 Frank De Stasi 6 months ago

TI__Guru 72965 points

Hello

Are you looking for the ADJ model or the Fixed output voltage model.

Thanks

0 Sri Viswa Sathiamoorthy 6 months ago in reply to Frank De Stasi

Prodigy 195 points

I am looking for fixed output voltage (5V)

0 Frank De Stasi 6 months ago in reply to Sri Viswa Sathiamoorthy

TI__Guru 72965 points

Hello

Please see attached

We can provide an unencrypted model; however this model will allow you to change the application parameters as needed.

It is valid for typical room temperature simulations only.

Small signal and small transient simulations

https://e2e.ti.com/cfs-file/__key/communityserver-discussions-components-files/196/example_5F00_sim_5F00_fixed_5F00_encrypt.sxsch

Thanks

0 Sri Viswa Sathiamoorthy 5 months ago in reply to Frank De Stasi

Prodigy 195 points

Thanks. Just give me some time, I will use this to check if all simulation requirements can be covered.

0 Frank De Stasi 5 months ago in reply to Sri Viswa Sathiamoorthy

TI__Guru 72965 points

Hello

I will close this post; you can re-open if you need further assitance.

Thanks

0 Sri Viswa Sathiamoorthy 4 months ago in reply to Frank De Stasi

Prodigy 195 points

Hi Frank,

Whether the model provided can be used for performing Middlebrook criteria analysis?

Whether is it possible to share simetrix spice model? We also like to perform Conducted emission simulation

Kindly help

Thanks

0 Frank De Stasi 4 months ago in reply to Sri Viswa Sathiamoorthy

TI__Guru 72965 points

Hello

The SIMPLIS model provided can do Bode plot and stability analysis.

We do not have a model that can be used for EMI simulation.

Thanks

Power management

Power management forum

LM63610-Q1: Simetrix spice model of LM63610DQDRRRQ1