• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 78 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ40Z50-R2: COVL setting

HY
Intellectual 2060 points
Part Number: BQ40Z50-R2

Tool/software:

Hi Team,

May I know what reason we suggested both PFStatus()[COVL] and SafetyStatus()[COVL] do not enable at the same time?

  • 0
    TI__Mastermind 27475 points

    Hello HY, 

    This is simply due to both PFStatus()[COVL] and SafetyStatus()[COVL] using the same logic and data flash setting meaning that they will interfere with each other during an repeated cell overvoltage event.

    Thank you,
    Alan