TPS54538: WEBENCH SIMULATE

Koshi Ninomiya

Part Number: TPS54538

Tool/software:

Dear Team,

My customer want to simulate the TPS54538 by WEBENCH POWER DESIGNER, but "SIMULATE" of WEBENCH does not work. "Simulation not enabled for this design" appears.

When will the simulation of the TPS54538 enabled?

Best Regards,

Koshi Ninomiya

5 months ago

0 Colin Chen 5 months ago

TI__Mastermind 21161 points

Hi Koshi,

Got it. We will active it later.

For now, you can use pspice model for simulation.

Thanks,

Colin

0 Koshi Ninomiya 5 months ago in reply to Colin Chen

TI__Expert 5455 points

Hi Colin,

When will we be able to use the simulation of the TPS54538?

Best Regards,

Koshi Ninomiya

+1 Colin Chen 5 months ago in reply to Koshi Ninomiya

TI__Mastermind 21161 points

Hi Koshi，

It need about two or three month to integrate pspice model into webench.

In the meantime, you can use the pspice model directly of TPS54538. It is more accurate.

Thanks,

Colin

0 Koshi Ninomiya 5 months ago in reply to Colin Chen

TI__Expert 5455 points

Hi Colin-san,

I understand about "SIMULATE".
In "CUSTOMIZE", the first page of the WEBENCH, "OPERATING VALUES" and "CHARTS" are displayed accurately according to the input specification, right?

Best Regards,

Koshi Ninomiya

+1 Colin Chen 5 months ago in reply to Koshi Ninomiya

TI__Mastermind 21161 points

Hi Koshi,

Yes, it is.

Thanks,

Colin

Power management

Power management forum

TPS54538: WEBENCH SIMULATE