• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 162 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS7A94: Connection errors in datasheet

siewweng leong
Prodigy 40 points
Part Number: TPS7A94
Other Parts Discussed in Thread: TPS7A96

Tool/software:

Hello.

As I was reading the datasheet, I find some connection errors in the typical application shown in the datasheet below. The PG pins should not be grounded. The datasheet for TPS7A96 also show the same error.

Please review and update for future revision.

  • 0
    TI__Genius 13790 points

    Hi Siewweng,

    Thank you so much for pointing this out. I will get this corrected. Meanwhile, please refer to the typical application circuit diagrams on page 1 of the datasheets for an accurate representation.

    Regards

    Ishaan