• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 3364 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

what are there in the .DFI file and .senc file?

stones yang
Expert 1080 points

Hi,everyone

                 what are there in the .DFI file and .senc file?I know the file is binary.Are they transferred to String file?Thanks in advance.

Regards

Stones

  • 0
    TI__Expert 3865 points

    Please refer to the sticky post, "Introduction to Multi-Cell Gas Gauges" File Extension section, http://e2e.ti.com/support/power_management/battery_management/f/180/t/128277.aspx.

    You can create a script to convert the .DFI into any format you preferred. The .senc is a encrypted file. You can only use EVSW to read/write this file to the gas gauge devices.