Tool/software:
Can you please help me with the below details?
- CSD17313Q2 – Tj max, ESD(HBM) and Copper wire qualification?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software:
Can you please help me with the below details?
Hello Aarthi,
Thanks for your interest in TI FETs. The CSD17313Q2 passes 150V HBM and 1000V CDM. We are working to get the copper wire qualification information you requested. I will update you as soon as I have more information.
Best Regards,
John Wallace
TI FET Applications
Hi Aarthi,
The CSD17313Q2 is qualified by similarity, using the following tests with 0 failures:
Please let me know if you need any additional information.
Thanks,
John
Hi Aarthi,
Tjmax = 150°C (operating and storage) for the CSD17313Q2.
Thanks,
John
Thank you John. Please let me know if there is any update on the copper wire qualification details.
Hi Aarthi,
The data I share is for the copper wire qualification. Qualification of the original device was completed earlier.
Thanks,
John