UCD90120 - PMBus Document (SLVU352 vs SLUU337)

Kurt Schmidt

Page 8 of the data sheet for this device references document SLVU352 as the PMBus command reference document. This should actually reference document SLUU337 correct? If so, please update the data sheet.

over 13 years ago

0 Eric Wright over 13 years ago

TI__Mastermind 42795 points

SLVU352 is correct for sequencers while SLUU337 is correct for the controller parts. SLVU352 is not the most current version of the sequencer command reference and TI is working on an internet solution to "re-direct" users to the most current version which will eventually be available at the site below.

http://www.ti.com/tool/fusion_digital_power_designer&DCMP=hpa_pmp_general&HQS=NotApplicable+OT+fusiongui or

http://software-dl.ti.com/analog/analog_public_sw/fusion/doc/?DCMP=hpa_pmp_general&HQS=NotApplicable+OT+fusiondocs

I have attached the latest version until the internet solution takes effect.

UCD90xxx_PMBus_Command_Reference[1].pdf

0 Lakshmi Santosh over 13 years ago in reply to Eric Wright

Intellectual 380 points

This document link is still not fixed. Please provide at least some guidance to customers. I accidentally landed on this page and found this document.

Thanks,
Lakshmi

0 Eric Wright over 13 years ago in reply to Lakshmi Santosh

TI__Mastermind 42795 points

The most current UCD90xxx PMBus™ Command Reference is available at http://www.ti.com/fusiondocs

Power management

Power management forum

UCD90120 - PMBus Document (SLVU352 vs SLUU337)