The TI E2E™ design support forums will undergo maintenance from July 11 to July 13. If you need design support during this time, open a new support request with our customer support center.

  • State Resolved
  • Locked Locked
  • Replies 5 replies
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 131 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM5168PEVM: the layout for ripple generation portion

Noriyuki Takahashi
Genius 10730 points
Part Number: LM5168PEVM
Other Parts Discussed in Thread: LM5169,

Tool/software:

Hi team,

They want to use LM5169. Based on the datasheet, they need to take care the layout of the feedback portion. However, there are no description about the layout for ripple generation portion. 

So looking at the LM5168PEVM, the layout for ripple generation portion also follow up on the same method with the feedback portion as figure below. Could you confirm whether TI recommeds the layout of ripple generation portion needs to follow up on the same method with the feedback ortion?

Regards,

Noriyuki Takahashi