TPS631010: What's the quiescent current into Vin/Vout when in Force PWM mode?

Hugo Lee

Part Number: TPS631010

Tool/software:

Hello~

What's the quiescent current into Vin/Vout when in Force PWM mode when Vout 3.3V and [Vin < Vout] & [Vin > Vout] condition?

Quiescent current in PFM mode should be (0.15+8)uA ~(6.1+8)uA, right?

Best regards,

4 months ago

0 Aurora Tie 4 months ago

TI__Genius 16890 points

Hi,

Because of weekend, our AE will give you feedback next Monday. Thanks for your patience.

Aurora

0 Tao Zhang 4 months ago in reply to Aurora Tie

TI__Mastermind 32350 points

Hi Hugo,

Correct, quiescent current in PFM mode is close to 8uA. 8uA here is the total current including from Vin and Vout.

If in FPWM mode, if my memory is correct, it should be around 5mA.

Regards

Tao

Power management

Power management forum

TPS631010: What's the quiescent current into Vin/Vout when in Force PWM mode?