CSD87355Q5D: want 60V and P2P device

J-ZHOU8

Intellectual 2650 points

Part Number: CSD87355Q5D

Tool/software:

Hello experts

Hope this finds you well.

Do we have higher voltage and P2P device for this please?

60V is needed.

We use this as FET for TPS51215ARUKR.

Thank you

Regards,

Zhou

4 months ago

+1 John Wallace1 4 months ago

TI__Mastermind 38200 points

Hello Zhou,

Thanks for the inquiry. We do not have any p2p higher voltage power blocks; 30V is the maximum. Can you share the requirements (Vin, Vout, Iout) and why a 60V power block is needed? The TPS controller supports up to 28V max input. We have 60V discrete FETs that may be applicable.

Best Regards,

John Wallace

TI FET Applications

0 John Wallace1 4 months ago in reply to John Wallace1

TI__Mastermind 38200 points

Hi Zhou,

Following up to see if your issue has been resolved. Please let me know.

Thanks,

John

0 John Wallace1 4 months ago in reply to John Wallace1

TI__Mastermind 38200 points

Hi Zhou,

Since I have not gotten a response, I assume your issue has been resolved.

Thanks,

John

Power management

Power management forum

CSD87355Q5D: want 60V and P2P device