• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 65 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS929160-Q1: schematic review

Ivy Jin
Expert 4575 points
Part Number: TPS929160-Q1

Tool/software:

Hi team,

Could you please help review the schematic and give some comments? Thank you.

24218TL PWB ASSY1-L.pdf

Regards,

Ivy

  • +1
    TI__Genius 17590 points

    the schematic is OK. please make sure that there is pullup resistor at CANX side,or else pull up resistor on RX/TX

     is required.

    You may also have small cap ~pF place holder from RX/TX to gnd for emc

    consideration.