BQ25306: BQ25306

Aldo Gonzalez

Part Number: BQ25306

Tool/software:

Hi Friends !!! I do not understand very well the EN and POL pins function. I want to leave those 2 pins fixed, so that when I connect the power supply it starts charging... where do I put them? to ground or Vcc?

Thsnks !!

Aldo

4 months ago

0 Ning T 4 months ago

TI__Guru 57341 points

Hi Aldo,

e.g. With POL pin grounded, the device is enabled with EN pin pulled high, and the device is disabled with EN pin pulled low or floating.

Thanks,

Ning

0 Aldo Gonzalez 4 months ago in reply to Ning T

Prodigy 70 points

Hi Ning !!! thank you very much !! have a nice day !!

0 Aldo Gonzalez 4 months ago in reply to Ning T

Prodigy 70 points

Last question... Those pins, regardless of whether I connect them to ground or positive, are they connected directly or is there a resistor in between?

0 Ning T 3 months ago in reply to Aldo Gonzalez

TI__Guru 57341 points

Hi Aldo,

Please follow the d/s.

Thanks,

Ning.

Power management

Power management forum

BQ25306: BQ25306