• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 62 subscribers
  • Views 81 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS54J060: Regarding OCP settings

Gary Chang
Intellectual 500 points
Part Number: TPS54J060


Tool/software:

Hello TI team,

The SPEC defines the Rtrip range as 3.74 to 30.1 kΩ

We would like to ask if it is possible to set it greater than 30.1 kΩ  (OCP point is set at 0.8A)

Thanks