Tool/software:
Hi. Is is possible to obtain a 3D model of the EV2400 tool? In my factory we are building for internal purposes a "Battery Talker" that incorporates EV2400 with nests for our batteries. This means that would need to receive from TI a 3D model of the EV2400. Thank you in advance.
Hello Bartosz,
Sorry we don't have a 3D model of the EV2400 tool, all our public cab models would be located in "ultra librarian". In the datasheet you can find the dimension of the circuit board alone, another thing to note is that you don't need the casing to use the debugger.
*Units in inches
Thank you,
Alan
