• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 64 subscribers
  • Views 59 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS23881B: TPS23881B initialization

gregory HERMANT
Prodigy 40 points
Part Number: TPS23881B

Tool/software:

Hi,

I'd like to know if it's possible to use channel 1 for PoE+ Port 1 (802.3at : 2pair 30W) and use channel 2 & 3 for HiPoE Port 2 (802.3bt 4pair 60W) 
If yes, could you please tell me how to initialize the registers.
Thanks in advance

Regards

  • 0
    TI__Mastermind 46271 points

    Hello Gregory,

    Our team is out on holiday, so please be aware that there might be some delay before we can provide feedback.

    Best, 

    Seong

  • 0 in reply to Seong Kim
    TI__Mastermind 37071 points

    Hi Gregory,

    Thanks for your patience. 

    Since the channels are bundled in 4-pairs police. It is recommended to use Channel 1 for the 802.3at : 2pair 30W port. And Channel 3&4 for the 802.3bt 4pair 60W port. 

    The register will be initialized when power is off -> on. Or you can load the SRAM manually to initialize it. 

    Best regards,

    Diang