Tool/software:
Is there pull-up or pull down on inputs? [MR, WDI, WD-EN, SET0/1]
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software:
Is there pull-up or pull down on inputs? [MR, WDI, WD-EN, SET0/1]
Hi Ariel,
MR has a 100kOhm pullup on VDD.
WDI, WD-EN, & SET0/1 are floating and must be driven externally.
Thanks,
Joshua